EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Charge Controller is a very productive photo voltaic controller suitable for off-grid photo voltaic units. Depending on multiphase synchronous rectification know-how, it makes sure optimized energy conversion and method steadiness for a wide array of photovoltaic (PV) purposes.
Critical Attributes of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Demand Controller technology for exceptional solar Power harvesting. Crucial functions contain:
Multiphase Synchronous Rectification (MSR) for improved Electrical power conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with authentic-time facts checking.
A number of Load Management Modes which include handbook and timer.
Comprehensive Electronic Protections towards overcharging, above-discharging, quick circuits, and reverse polarity.
Stage-by-Stage Manual to Setting Up the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Make sure all components are bundled: Tracer AN device, temperature sensor, communication cables, and person handbook.
Confirm the model amount and voltage ratings match your photo voltaic panel and battery technical specs.
2. Mounting the Cost Controller
Decide on a properly-ventilated, dry spot near to the battery financial institution.
Safe the Tracer AN controller utilizing the offered mounting brackets.
Retain right clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Always follow good Read more protection protocols and make sure the technique is powered off before connecting factors.
Phase 1: Connect the battery terminals into the cost controller (good to positive, destructive to adverse).
Phase 2: Join the photo voltaic panel array towards the PV enter terminals.
Action 3: Hook up the load terminals if employing a direct load connection.
Action 4: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Options
Electric power around the controller by connecting the battery initially.
Use the Liquid crystal display Screen to navigate the options menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Manual, timer, light-weight Command.
five. Checking and Knowledge Logging
The Tracer AN Sequence supports authentic-time monitoring utilizing the MT50 remote meter.
Info could be logged by using the RS485 interaction port working with software package like Photo voltaic Station Personal computer.
Distant monitoring is achievable While using the EPEVER WiFi module.
six. Troubleshooting Frequent Challenges
Situation 1: No Ability Output
Verify battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Challenge two: Around-Voltage Security
Verify the photo voltaic array’s voltage rating.
Alter technique parameters if required.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT settings in the menu.
Great things about the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technological innovation makes certain:
Greater Performance: Lowered Electrical power losses for the duration of conversion.
Enhanced Reliability: Secure efficiency beneath variable hundreds.
Extended Battery Everyday living: Regular and accurate charging profiles.
Summary
The EPEVER Solar Charge Controller with multiphase synchronous rectification technology is really an Remarkable choice for optimizing solar power era and increasing battery existence. By next the above set up guideline, customers can make sure greatest efficiency and program longevity.